Uniden DCT7488 - Manual (Page 12)

[ 1 1 ] G E T T I N G S T A R T E D w w w . u n i d e n . c o m
B. Connect the base unit
1) Connect the handset cord to the left side of the
phone and the corded base handset.
2) Connect AC adapter to the DC IN 9V jack and to a
standard 120V AC wall outlet.
Connect the AC adapter to a continuous power
supply (i.e., an outlet that is not controlled by a
switch).
Place the base unit close
to the AC outlet to avoid
long extension cords.
3) Connect the telephone
line cord to the TEL LINE
jack.
4) Set the base on a desk or tabletop. Place the corded
base handset on the base.
5) Raise the antenna to a vertical position.
If your telephone outlet isn't modular,
contact your telephone company for
assistance.
•Use only the supplied
[AD-800] AC adapter.
Do not use any other
AC adapter.
•Do not place the power
cord where it creates a
trip hazard or where it
could become chafed
and create a fire or
electrical hazard.
note
GE
T
T
I
NG S
T
A
R
T
E
D