UTStarcom ARC VMUTX1 - Manual (Page 21)

Settings 41
H RINGTONES, ALERTS & TONES
To set my rin gtones
1. In standby mode, press Menu > Tools & Settings
> Sounds > My ringtones.
2. Select ringtones > Assign.
Note:
To play/stop sound, press Play or Stop.
To set msg tones
To set my ringtone ringtone
1. In standby mode, press Menu > Tools &
Settings > Sounds > Msg tones >
My ringtones.
2. Select ringtone > Assign.
Note:
To play/stop sound, press Play or Stop.
To set vibrate mode
1. In standby mode, press Menu > Tools &
Settings > Sounds > Msg tones > Vibrate
mode.
2. Select On or Off > Off Off Select.
To set service alerts
1. In standby mode, press Menu > Tools & Settings
> Sounds > Service alerts.
2. Select Minute beep or Call connect > Call connect Call connect On or Off
> Select.
To set volume
To set the ringer volume To set the ringer volume
1. In standby mode, press Menu > Tools &
Settings > Sounds > Volume > Ringer volume.
2. Select Silence All, Vibrate, Level 1 ~ Level 5 or
Level 5 + Vibrate > Select.
To set the voice call volume
1. In standby mode, press Menu > Tools &
Settings > Sounds > Volume > Voice call.
2. Select Level 1 ~ Level 5 > Select.
To set the speakerphone volume To set the speakerphone volume
1. In standby mode, press Menu > Tools &
Settings > Sounds > Volume > Speakerphone.
2. Select Level 1 ~ Level 5 > Select.
To set power tone on/off
1. In standby mode, press Menu > Tools & Settings
> Sounds > Power tone.
2. Select Power on tone or Power off tone > On
or Off > Off Off Select.
To set key tone
1. In standby mode, press Menu > Tools & Settings
> Sounds > Key tone.
2. Select Silent, Silent Silent Level 1 ~ Level 5 > Level 5 Level 5 Select.
40 Settings
H DECORATE THE DISPLAY
To set the graphics
To set the wallpaper wallpaper
1. In standby mode, press Menu > Tools &
Settings > Display > Graphics > Wallpapers.
2. Select Main screen or External screen.
3. Select wallpaper image > Select.
To set the screensaver timeout
1. In standby mode, press Menu > Tools &
Settings > Display > Graphics > Screensavers >
Timeout setting.
2. Select 5 seconds, 10 seconds, 20 seconds,
30 seconds or Off > Select.
To set the screensaver image To set the screensaver image
1. In standby mode, press Menu > Tools &
Settings > Display > Graphics > Screensavers >
Screensavers.
2. Select screensaver image > Select.
To set the main screen clock format
1. In standby mode, press Menu > Tools &
Settings > Display > Graphics > Clock format
> Main screen.
2. Select Digital, Analog, Digital+Analog or Off
> Select.
To set the external screen clock format
1. In standby mode, press Menu > Tools &
Settings > Display > Graphics > Clock format >
External screen.
2. Select Digital, Analog or Off > Select.
To set the caller ID with default VMU image To set the caller ID with default VMU image
1. In standby mode, press Menu > Tools &
Settings > Display > Graphics > Caller ID.
2. Select VMU default > Select.
To view the menu style
1. In standby mode, press Menu > Tools & Settings
> Display > Menu style.
2. Select Grid view or List view > List view List view Select.
To enter greeting message
1. In standby mode, press Menu > Tools & Settings
> Display > Greeting banner.
2. Edit greeting banner message, press Navigation
Key down, select Font color, then press Font Font
Navigation Key down and select Outline color
> Save.
To set contrast display
1. In standby mode, press Menu > Tools & Settings
> Display > Contrast.
2. Select Highest, Highest Highest High, Medium, Low or Lowest
> Select.