UTStarcom ARC VMUTX1 - Manual (Page 9)

Calls & Contacts 17
H MAKING, RECEIVING & ENDING A CALL
To make a call
1. Enter the area code and phone number.
2. Press [ ].
To answer a call
1. Press [ ].
To end a call
1. Press [ ].
Once the call is completed, a call summary is
displayed.
To reject a call
1. Press [ ] or Ignore.
To make a call using call list
Your phone logs up to 270 outgoing, received and missed
call numbers.
1. In standby mode, press [ ] to display the
Recent Calls list. Recent Calls Recent Calls
2. Select a number.
3. Press [ ] to dial the selected number.
Note:
• To redial the last number in the Recent Calls list, press
[ ].
• After 270 received, outgoing or missed calls, the oldest
call will automatically be erased from the history.
To make a call using contacts
1. In standby mode, press Contacts to access the
contacts list. Select the desired phone number
and press [
].
To adjusting the call volume
1. In call, press Side volume key up or down to
adjust the earpiece volume.
To insert a Time/Hard pause feature
Insert a pause after a phone number and then enter
another group of numbers. If "Time pause" inserted, the
second set of numbers is dialed automatically after the
pause. If "Hard pause" inserted, send the next set of
numbers when you press [
].
. Enter a phone number and then press Options.
Select either Hard pause (“P”) or Time pause
(“T”).
To switch between two calls
1. Press [ ].
To reply to a missed call**
1. Press View to display the list of missed calls. View View
2. Select a number to call by pressing [ ] or
[ ].
3. Press [ ].
To answer a second call**
1. Press [ ]. The first call is automatically put
on hold.
16 Calls & Contacts
2. Press [ ] to end the second call.
The call on hold is automatically reconnected.
H CALLER ID
Identifies caller by displaying their phone number.
If the caller’s name and number are already stored in your
contact list, name and number will appear. The caller ID is
stored in the Recent Calls Menu.
H CALL WAITING FUNCTION
Notifies you of an incoming call when you are already on
a call by sounding a beep tone and displaying the caller’s
phone number.
To answer another call while on the phone,
press [
]. This places the first call on hold. To
switch back to the first caller, press [ ] again.
H SPEAKERPHONE
The speakerphone feature lets you hear audio through the
speaker and talk without holding the phone.
To activate the speakerphone in idle mode or while
on a call, press [
] or press Speaker.
H VIBRATE ON/OFF MODE
In standby mode, press and hold to turn
Vibrate mode On/Off.
H MAKING AN EMERGENCY CALL
The 911 feature automatically places the phone in
Emergency Call Mode when you dial the preprogrammed
emergency number, 911.
To make an emergency (911) call in lock
mode
1. Enter “911” and then press [ ].
2. The phone maintains the Emergency Mode for
until press Exit.
To make an emergency (911) call using any
available system
1. Enter “911” and then press [ ].
2. The phone will stay in Emergency Mode
for until press Exit. While the phone is in
Emergency Mode for until press Exit, the phone
Exit Exit
can receive an incoming call from any available
system or you can make outgoing calls even in
the Emergency Callback Mode.
H OPTIONS DURING A CALL
Microphone off and on
To switch your phone’s microphone off
1. Press Mute.
To switch your phone’s microphone back on To switch your phone’s microphone back on
1. Press Unmute.
To talk on speaker
1. Press [ ] or press Speaker.