VIEWSONIC PS500B User Manual
Page 18
10
PS500B/PS800B
3. We recommend that you charge the battery for six (6) hours before first
use of your UPS. You may use the UPS immediately without charging
the battery, but the backup time may be less
UPS recharges the battery automatically whenever AC power is
available.
The UPS recharges the battery automatically whenever AC power is
available.
3.5 Connecting Your Equipment to the UPS
1.
For all UPS models except the 2x0V versions: connect the power cord(s)
of your computer equipment to the output receptacle(s) of the UPS.
Switch on the computer equipment.
2.
For 2x0V versions, as shown in the illustration below: connect the input
power cord of your computer equipment to the inlet of the UPS and the
wall socket. Use the power cord supplied with the UPS to connect from
the outlet of the UPS to your equipment. Switch on the computer
equipment.
3.
DO NOT PLUG LASER PRINTERS INTO THE UPS BECAUSE THEY
TYPICALLY DRAW TOO MUCH POWER