Venturer KLV39120 - Manual (Page 13)

- 12 -
CONNECTIONS
Connecting the TV Antenna
Connect a TV antenna or CATV cable or Satellite system to the TV antenna terminal.
Connecting the Unit to a TV or other Video Equipment
Use the Video cable (not supplied). Connect the VIDEO OUT on the rear of the unit to the VIDEO IN on
your TV or other video equipment.
1
2
TV antenna
To the TV ANT
IN terminal
Video cable (not supplied)
(yellow)
TV or other Video
Equipment
VIDEO
IN
Connecting the AM LOOP Antenna and FM Wire Antenna
Connect the AM LOOP antenna (included) to the AM LOOP ANT terminal and the FM wire antenna
(included) to the FM ANT terminal.
FM: Fully unwind the antenna wire and position it for the best reception.
AM: Fully unwind and rotate the loop antenna then position it for the best reception.