VTech VT 1511 - Manual (Page 22)

22
QUICK REFERENCE GUIDE
• Enter the number you wish to store
(up to a maximum of 20 digits).
• Press the MEMORY key to store
the number and exit.
Dialing from Memory
From the base unit:
•
Lift the handset.
• Press the MEMORY key and then
enter the 2 digit memory location
code (00 to 20) to be dialed.
• The number stored in the selected
memory location will be
automatically dialed.
Or
• Lift the handset and press the
QUICK MEM key to automatically
dial the number stored in location
‘00’.
From the wireless headset:
•
Put on the wireless headset.
• Flip the microphone down to the
ON position. You should hear dial
tone.
• Using the dial card (with keypad
facing you), press the MEM key
followed by the 2 digit memory
location code (00 to 20) to be
dialed.
• The number stored in the selected
memory location will be
automatically dialed.
Using Redial
From the base unit:
•
Lift the handset and press the
REDIAL key. The last number
dialed from the base unit will be
automatically dialed.
From the wireless headset:
•
Put on the wireless headset.
• Flip the microphone down to the
ON position. You should hear dial
tone.
• Using the dial card (with the keypad
facing you) press the REDIAL key.
The last number dialed from the dial
card will be automatically dialed.
FLASH
From the wireless headset:
•
During an active call, press the
FLASH key on the dial card to flash
the line. This feature is commonly
used with services such as Call
Waiting.
Or
• During an active call, press the
FLASH key located on the right side
of the wireless headset. The
FLASH key has is surround by ( )
to help you locate it by touch.