Vizio TWRS-I - Manual (Page 20)

Dry Out Feature
The Dry Out feature is provided to override the Water Conservation baseline level, allowing the
dry-out delay period to be set with more accuracy from 0.5 to 4.0 days in 0.5-day increments.
Note: Before using the Dry Out feature, allow the sensor system to normalize by cycling through
rain and/or freeze activation several times.
1. Press the
Setup button to display the Dry Out icons.
The display will indicate the current Dry Out day setting (factory default is
0.0 days). The
Setup icon will begin flashing to indicate the selected
feature can be adjusted. See Figure 24.
2. Press the Adjust button to select the desired value (0.5 to 4.0 days).
Note: Once activated, the Dry Out mode can be canceled by pressing the Smart Bypass
button.
Note: Changing the Water Conservation level will override the Dry Out feature setting.
Fail Safe Feature
The Fail Safe feature is provided to alert and respond to a loss of communication signal and/or if
the sensor system stays in the active mode for a prolonged period of time. This important feature
safeguards your automatic irrigation system from being inadvertently shut off for an indefinite
period of time due to a rain sensor system malfunction.
18
Figure 24
373-0372a_E/S/F 6/7/05 1:59 PM Page 18