Vestax PCV-175 - Manual (Page 7)

Driver
6
HOW TO CHANGE THE FADER UNIT
Insert the
multi-cable connector
Set switch to "PCV" position.
HOW TO REMOVE THE TOP PANEL
1 Remove each fader knobs and 6 screws which
fix the top panel.
2 Remove the top panel.
HOW TO CHANGE THE FADER UNIT
1 Remove the screws on the fader panel.
2 Remove the fader unit from position in mixer.
3 Carefully remove the multi-cable connector from
fader unit.
4 Attach multi-cable connector to new fader unit.
5 Position the fader unit carefully and secure with
screws.
PMC CONNECTOR
Set switch to "PMC" position
CF-PCV For
PMC SERIES
( PMC05ProII, PMC06ProA, etc)
Driver