Vestax PCV-175 User Manual
Page 8
7
MASTER SECTION
19
20
21
22
24
25
18
23
18
MASTER OUT LEVEL METER
Indicate the signal level of the line output. The
lowest segment lights when the power is on.
19
EFFECT SEND LEVEL
Used to adjust the output level from EFFECT SEND
JACK.
20
EFFECT RETURN LEVEL
Used to adjust the input level from EFFECT
RETURN JACK.
21
MASTER BALANCE VOLUME
Adjust the signal balance between left and right of
the master output.
22
MASTER LEVEL VOLUME
Adjust the signal level of the master output.
23
P.F.L. SWITCH
Used to send the master output signal to the monitor
section for the headphone monitoring.
24
HEADPHONE LEVEL
Adjusts the headphone monitor level.
25
HEADPHONE JACK
Connect the headphones with the inpedance of 8ohm
to 600 ohm.
13
MIC INPUT JACK(MAIN MIC, MIC1
3)
Input jacks for MAIN MIC, MIC1, MIC2 and
MIC3.
14
MIC LEVEL
Adjusts the input level of MIC1, 2 and 3.
15
MIC EQUALIZER(HI,LOW)
Adjusts the HI and LOW frequency level of MIC1,
2 and 3.
16
EFFECT SWITCH
Used to send the signal to the external effect
processor connected to the effect SEND/RETURN.
17
P.F.L. SWITCH
Used to send the signal from the mic channel to the
monitor section for headphone monitoring.
15
13
14
16
17
MIC INPUT SECTION