ViewCast Osprey-450e - Manual (Page 55)

Osprey 240e/450e User Guide
ViewCast 49
Pin Select
You can have different setups for the two pins. For example, you could enable the logo on the
capture pin but not on the preview pin, and thereby save some CPU time.
Figure 42. Pin Select
Capture When you click Capture, the current logo settings for the capture pin
are loaded, and changes you make apply only to the capture pin, not
to the preview pin.
Preview The Preview button works analogously.
Both When you click Both, changes you make to the logo setup apply to
both the capture and preview pins.
File and Color
Figure 43. File and Color
The Enable Logo checkbox, which is repeated on both sub-tabs, enables or disables logos. If you
disable logos, all your other logo settings are retained for when you re-enable logos.
In Figure 43, the Browse for File button brings up a standard file select dialog. Logo files must be:

In .bmp format with a .bmp filename extension.

In RGB-24 format.
If you have a graphic in another format, edit it with a drawing or photo edit program such as
Windows Paint, and save it as RGB-24.