Vialta Beamer TV - Manual (Page 21)

19
Line Quality Indicator
The quality of your video call depends on the quality of
your telephone line. A blinking red “LINE” will appear in the
upper, right hand corner of the television if the line quality
drops by more than 10%. If the Line Quality Indicator
appears frequently, you may want to try your call again or
have your telephone line tested by your local carrier.
When the line quality drops too low to support a video call,
Beamer TV will automatically attempt to improve the
connection, which may take up to 20 seconds. During this
time a beep and a “Please wait” message will be heard. If
the connection has improved enough to support a video
call, a second beep will be heard and you may continue
your video call. However, if the connection still cannot
support a video call, your television will display “Line
condition cannot support video. Returning to voice only
call. Press START/VIEWS to try video again”. At this time,
you may continue a voice only call or try to establish a
video call again by pressing the START/VIEWS button.
Line
BeamerGuide.book Page 19 Thursday, March 11, 2004 11:19 AM