Heading 3 - two-line phone with a single wall jack, Installing your beamer tv with a two-line phone, Two-line phone with a single wall jack – Vialta Beamer TV User Manual
Page 8
6
Installing your Beamer TV with a Two-Line Phone
Your Beamer TV also works with a two-line phone. Be sure
to place and receive video calls on Line 1 only. If you are
on a video call and receive a phone call on Line 2, Beamer
TV will let the call ring through to that line. We recommend
that you use another phone to answer the call instead of
putting the video call on hold. If you put your Beamer TV
video call on hold to answer a new call on the second line,
your video call may be disconnected.
Two-Line Phone with a Single Wall Jack
If you have a two-line phone that connects to a single wall
jack, connect your Beamer TV to the wall jack and to the L1
or L1/L2 jack on your two-line phone.
1) Place your Beamer TV on top of your television.
2) Connect one end of a supplied telephone cord to your
nearest telephone wall jack and the other end to the
LINE IN jack on the back of your Beamer TV.
3) Connect one end of a supplied phone cord to the L1
or L1/L2 jack of your two-line phone and the other end
to the PHONE jack on the back of your Beamer TV.
4) Plug one end of the enclosed video cable into the
VIDEO OUT jack on the back of Beamer TV and the
other end into a Video input jack on your television.
5) Set your television to the correct video input source.
6) Plug the AC power adapter’s pin into the POWER IN
jack on the back of your Beamer TV.
7) Plug the power cord into a wall socket.
BeamerGuide.book Page 6 Thursday, March 11, 2004 11:19 AM