Vinotemp VT-32BCSB - Manual (Page 8)

8
8 W W W . V I N O T E M P . C O M
S N 3 2 B C H D 1 7 V T - S 1
REVERSAL OF DOOR SWING
This beverage cooler is built with a reversible door. You have the choice of
either opening it from the left or the right side. In order to reverse the
opening direction of your door, please follow these simple instructions.
.
CAUTION: To avoid personal injury to yourself and/or property,
we recommend someone assist you during the door reversal
process.
1. Remove the top hinge assembly and
keep for later use.
2. Remove the plug buttons from the
upper left holes and transfer them to
the uncovered holes at the right side.
Be sure to press the plug buttons
firmly into the holes.
3. Remove the door assembly and keep
for later use.
4. Remove the right bottom hinge and
left bottom hinge and install them on
the opposite sides.
5. Re-install the door assembly with
the door handle on the opposite side
(Rotating the door assembly for
180°). Make sure the door assembly
is properly aligned on the cabinet.
6. Re-install the top hinge assembly
previously removed in step 1 on the
opposite side and tighten the screws.
The process is now complete.
Note: 1. If desired, change the door swing before installation.
2. Please remember, do not power up the unit for 48 hours after
cooler has been out of an upright position to allow the coolants
to settle inside the compressor.