Viper 5500 - Manual (Page 33)

30
© 2006 Directed Electronics—all rights reserved
Valet Switch: A small push button mounted at a discretionary
location inside the vehicle. It is used to override the Failsafe ®
Starter Kill when a transmitter is lost or damaged, or to enter or
exit Valet Mode.
Convenience Expansions
Listed below are some of the many expansion options available for
use with your system. Some options may require additional parts
and/or labor. Please consult with your dealer for a complete list of
options available for use with this system.
Domelight Supervision: The domelight will illuminate for 30
seconds each time the system is disarmed using the transmitter.
This is useful for seeing inside the vehicle at night prior to enter-
ing it.
Power Door Lock Control: Your system is capable of controlling
many types of power door lock systems; however, some door lock
systems may require extra parts. Consult with your dealer to deter-
mine which type of locks your vehicle uses. If power locks are
connected, the system can be programmed to lock the doors auto-
matically 30 seconds after the ignition has been turned off. The
system can also be programmed to lock the doors when the ignition
is turned on and to unlock them when the ignition is turned off.
Power Trunk Release: The system’s auxiliary output can be pro-