Vivotek IP7131 - Manual (Page 46)

- 45 -
www.vivotek.com
Digital output
“Enable digital output” Enable/Disable digital output application.
Weekly schedule
“Sun” ~ “Sat” Select the days of the week to perform the application.
Select “Always” or input the time interval.
Digital input
Network Camera will trigger digital output when the digital input is triggered.
Trigger digital output while motion detection
There are three windows for motion detection each can be assigned a name. Select the
windows which need to be monitored. If motion detection has not been set up,
“undefined” will be shown instead of the window title. If this happens, clicking on
“Motion detection” and a note will show to direct the User to the configuration page for
motion detection.
“Delay second(s) before detecting next event” Set the time delay before
restarting to check on the triggering condition when the current condition is triggered.
45 - User's Manual
VIVOTEK - A Leading Provider of Multimedia Communication Solutions