VDO Dayton CD 2327 G - Manual (Page 18)

18
GENERAL OPERATION
Switching On / Off
To switch on the headunit, short-press the
PWR
MUTE knob.
To switch off the headunit, long-press the
PWR
MUTE
button.
Selecting a Source
Your headunit is designed for different types of
sources, depending on your headunit model.
RADIO
CD
AUX
USB
SD/MMC
BLUETOOTH
Short-press the
SOURCE
button to change the
source. If the external media, e.g. CD or SD
card, is connected or inserted, the correspond-
ing source will become available for selection.
AUDIO
Setting the Start-up Volume
Navigate the SAM * to select ‘START’.
* Please see ‘SOFTWARE ACCESS MENU (SAM)’ section
for steps on navigating the menu.
2. Turn the knob to adjust the starting volume to
a comfortable level.
Note: If the headunit was previously at a higher
volume level when you turned it off, after you
turn on the headunit, it will use the starting vol-
ume. Otherwise, the headunit will remember the
previous volume level.
SOUND Menu
You can select the different sound settings from
the SOUND menu. To navigate the SOUND
menu:
Short-press the
SOUND
button to enter the
SOUND menu.
Short-press either or button to select
the next SOUND item; or short-press the
either or button to select the previous
SOUND item.
Turn the knob clockwise or counter-clockwise
to choose the option.
Long-press the
SOUND
button to exit the menu.
Note: The headunit will automatically exit the
SOUND menu after 6 seconds of inaction.






1.




Option Setting
(◄/▼ or ►/▲) (turn the knob)
LOUDNESS [OFF, 1, 2, 3]
STYLE
[JAZZ, POP, CLASSIC,
USER, VOCAL, FLAT]
BASS
(only in ‘USER’ style)
[- to 0 to +]
TREBLE
(only in ‘USER’ style)
[- to 0 to +]
BALANCE [L to 0 to R]
FADER [F7 to 0 to B7]
Mute (silence)
When the headunit is switched on, short-press
the
PWR
MUTE
knob to mute the sound. If a media
(e.g. CD, USB or SD/MMC) is playing, it will be
paused. Short-press the same knob again to
un-mute the sound and the media will continue
playing.
Note: Turning the volume knob to ‘VOLUME
0’ will also mute the sound, but if the current
source is USB, SD / MMC or CD, the media will
continue playing in the background.
Balancing the Volume for Different
Sources
You can adjust the volume offset between your
sources, with reference to the tuner, so that in-
between switching from one source to another,
there is less annoying sudden change in volume
level and you may not need to adjust the volume
again.
You can adjust the volume-offset level for CD,
compressed audio, auxiliary and Bluetooth indi-
vidually. For example, to adjust the volume offset
level of the CD:
Navigate the SAM to select ‘CD LEVEL’.
Turn the knob clockwise / anti-clockwise to
change the offset level (relative to tuner vol-
ume level).
Do the same thing for rest of the sources / types,
if necessary, to your preferences.
RADIO
Region Setting
This headunit is customizable according to the
region that you live in for best-reception. To
change the region:
Navigate the SAM to select ‘REGION’.
Turn the knob clockwise / anti-clockwise to
select your region.
1.
2.
1.
2.