Vidikron VL-32HD - Manual (Page 31)

Installation
Vidikron VL-26/VL-32 Owner’s Operating Manual 21
RS-232 Controller
Connection VL-26 Serial Connection: Use a standard, 4-pin RJ-11 telephone cable to connect a PC or
home theater control/automation system (if present) to the RS-232 port on the VL-32.
VL-32 Serial Connection: Use a standard, 9-pin RS-232 cable to connect a PC or home
theater control/automation system (if present) to the RS-232 port on the VL-32.
For more information about using this connection, refer to Serial Communications on
page 47.
Figure 3-8. RS-232 Control System Connection
MONIT
OR-OUT
VL-26
Connector Pin Assignments:
2 Receive
Data
3 Transmit Data
1, 4 Ground
VL-32
Connector Pin Assignments:
2 Receive
Data
3 Transmit Data
5 Ground
1, 4, 6, 7, 8, 9 Not Connected