Vita Spa Portable Spa - Manual (Page 10)

P AGE 8
Never cover your V oyager with a transparent
plastic covering. The UV rays from the sunlight
may cause your liner to change color and
shorten its life.
COVE R INSTALLATION
1. Inflate cover with air pump provided. Do not
over inflate.
2. Place cover on filled spa. Be sure it is correctly
positioned.
3. P osition the tie-down hardware on the side of
the spa so that they are easily reached by the
cover tie-down straps.
4. Allow for about a 1/2” to 3/ 4” slack in the tie-
down strap to make it easy to insert the strap
into hardware and to compensate for vinyl
shrinkage in cold weather.
5. Attach hardware with screws provided.
6. K eep cover fastened down at all times when
not in use. The cover locking hardware may be
locked with a key (provided).
CAUTI ON: FAILURE TO FOLLOW THE ABOVE
INSTRUCTIONS MAY RESULT IN INJURY OR
DROWNING. DO NOT STAND, SIT OR LIE ON OR
PERMIT ANY HEAVY WEIGHT TO REST ON THE
COVER. THE INFLATABLE COVER IS NOT A
FLOATATION DEVICE AND IS MADE AS AN
INSULATING DEVICE AND SHOULD NOT BE
USED FOR ANY OTHER PURPOSE.
DO WN STRAP
LOCK
COVER