Vivotek SD7151 - Manual (Page 94)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
94 - User's Manual
Preset Locations
Note: This request requires operator privilege
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/operator/preset.cgi?[channel=<value>][&addpos=<value>][&delpos=<value>]
[&return=<return page>]
Parameter Value Description
addpos
<Text string less than 30
characters>
Add one preset location to preset list.
channel <0~(n-1)> Channel of video source
delpos
<Text string less than 30
characters>
Delete preset location from preset list.
return <return page>
Redirect to the page <return page> after the parameter
is assigned. The <return page> can be a full URL path or
relative path according to the current path. If you omit this
parameter, it will redirect to an empty page.
IP filtering
Note: This request requires administrator access privilege
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/ipfilter.cgi?method=<value>&[start=<ipaddress>&end=<ipaddress>]
[&index=<value>][&return=<return page>]
Parameter Value Description
Method
addallow
Add a set of allow IP address range to server. Start and
end parameters must be specified. If the index parameter is
specified, it will try to add starting from index position.
adddeny
Add a set of deny IP address range to server. Start and
end parameters must be specified. If the index parameter is
specified, it will try to add starting from index position.
deleteallow
Remove a set of allow IP address range from server. If
start and end parameters are specified, it will try to remove
the matched IP address. If index is specified, it will try to
remove the address from given index position. [start, end]
parameters have higher priority than the [index] parameter.
deletedeny
Remove a set of deny IP address range from server. If
start and end parameters are specified, it will try to remove
the matched IP address. If index is specified, it will try to
remove the address from given index position. [start, end]
parameters have higher priority than the [index] parameter.
start <ip address> The start IP address to add or to delete.
end <ip address> The end IP address to add or to delete.
index <value> The start position to add or to delete.