Vivotek IP7133/IP7134 User Manual
Page 31
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 31
2.
WEP (Wired equivalent Privacy): It allows communication only with other devices with identical WEP
settings.
■
Authentication Mode: Choose one of the following modes. Open is the default setting.
Open – communicates the key across the network.
Shared – allows communication only with other devices with identical WEP settings.
■
Key length: The administrator can select the key length among 64 or 128 bits.
64 bits is the default setting.
■
Key format: Hexadecimal or ASCII. HEX is the default setting.
HEX digits consist of the numbers 0~9 and the letters A-F.
ASCII is a code for representing English letters as numbers from 0-127 except “, <, > and space
characters that are reserved.
■
Network Key: Enter a key in either hexadecimal or ASCII format.
You can select different key length, and acceptable input length is listed as following:
64 bits key length: 10 Hex digits or 5 characters.
128 bites key length: 26 Hex digits or 13 characters.
NOTE
► When 22(“), 3C(<) or 3E(>) are input in network key, the key format can’t be changed to ASCII format.