Trouble shooting guide, Symptom cause (and remedy) – Venturer KTS230 User Manual

Page 34

Advertising
background image

- 33 -

SYMPTOM

CAUSE (AND REMEDY)

• Check that the equipment are connected securely.

• Make sure that you've selected the correct equipment on the system.

• The system is in pause mode or in Slow-motion Play mode. Press the PLAY button to return

to normal play mode.

• Fast forward or fast reverse is performed. Press the PLAY button to return to normal play

mode.

• Make sure that AUDIO output and AV IN input connections are correct.

• Adjust the speakers volume.

• This Unit is too hot, shut off the Unit for 30 minutes to cool down.

• Check that equipment are connected securely.

• Check that the connecting cords are away from a transformer or motor, and at least 10 feet (3

meters) away from a TV set or fluorescent light.

• Move your TV away from the audio equipment.

• The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.

• Clean the disc.

• Vibrations from the speakers are affecting the Unit.

• Remove any obstacles between the remote and the Unit.

• Use the remote near the Unit.

• Point the remote at the remote sensor on the Unit.

• Replace all the batteries in the remote with new ones.

• There is no disc inside ("No Disc" appears on the TV screen).

• Insert the disc correctly with the playback side facing down on the disc tray.

• Clean the disc.

• Condensation may have formed inside the Unit due to a sudden change in temperature. Wait

about an hour for it to clear and try again.

• Is the disc with Graphics or CDG marked on disc?
• Is the video in cable plugged in or loose?

• Is the TV set on mute mode?
• Is the volume set to the minimum?
• Is the audio in cable plugged in or loose?

• Is the connection of video and audio cable plugged in correctly?
• Are there any CDG inside the CD tray?
• Is the graphics disc upside down?
• Is the graphics disc excessively dirty?

• Is a cassette inserted?
• Is the cassette's erasure prevention tab broken off?

• Are the heads dirty?

• Is the erase head dirty?

No sound or only a very
low-level sound is heard.

The remote does not
function.

The disc does not play.

No graphics when playing
CDG.

No sound when playing
CDG.

No sound and no graphics
when playing CDG.

The REC button cannot
be pressed.

Recording cannot be
done.

The previous recording
cannot be erased.

Severe hum or noise is
heard.

Trouble Shooting Guide

Advertising