Vivitar 840XHD - Manual (Page 19)

18
DVR Functions and Menu Control
To power on the camera you need to flip open the LCD Screen. The Power button is
situated on the inside of the camera.
Power on
Press the Power button to turn on your DVR. The green LED on the back of the camera
will light up followed by the LCD monitor, indicating that your DVR is ready for use.
Power off
Press the Power button to turn your DVR camera off. The DVR camera will switch off.
Alternatively, simply close the LCD panel and the camera will automatically turn off.
If the DVR camera is not in use or in an operational mode for 60 seconds it will switch
off automatically.
When there is insufficient battery power, a flashing red battery icon will appear on
the LCD screen. The camera will automatically power off a few moments later
.