Vivitar 840XHD User Manual
Page 31
30
4.
Press the Exit button.
5.
Your camera is now ready to capture photos with the new settings you
selected.
6.
The selected resolution icon appears on the top left corner of the LCD.
Flash
The camcorder has 3 flash settings. You can change the flash setting by using the
Right button on the camera dial or from within the Flash submenu.
The flash icons appear at the top center of the LCD.
Auto
– The flash is fired on automatically according to the light conditions at
the time of taking the picture.
Red Eye
– A pre flash will fire before the regular flash to reduce the red-eye
affect.
Off
– The flash will not fire under any circumstances. Use this mode where
taking photos in a place where flash photography is prohibited or where
the object is distant beyond the range of the flash.