VocoPro CDG-1020PRO - Manual (Page 10)

10
TOP Panel
1. TIME - Switches between three settings:
- Elapsed playing time
- Remaining time in the current song
- Total remaining time of the disc
2. PREVIOUS - Use this button to jump back to a previous track.
3. 10+ - Automatically skips ahead 10 tracks.
4. CUE - Press the CUE button to enable CUE MODE.
5. PLAY/PAUSE - Use this button to start playback. Press once to start playback, once again to set the pause
mode, and once more to resume playback.
6. REPEAT/SINGLE – Press once to repeat one track and again to repeat all tracks of disc.
7. NEXT - Use this button to skip to the next track.
8. PROGRAM - Press this button to enable PROGRAM mode and set your own playlist.
9. CUE INDICATOR - This LED will indicate if the CUE function is enabled.
10. PLAY INDICATOR - This LED will be lit to indicate when the PLAY mode is enabled.
11. DISPLAY - Displays graphical information about playback settings and disc/song time.
12. FRAME DIAL - When the dial is turned while the CD is paused, the point at which the sound is paused
moves by a number of frames corresponding to the number of clicks. Clockwise moves the point forward and
counterclockwise moves the point backward.
13. DISC INDICATOR - This LED will be lit to indicate when a disc is in the player and blink when a disc is not in the
player.
14. OPEN/CLOSE - Opens and closes the CD disc tray. The tray cannot be opened during playback to prevent
accidental interruption.
15. LOOP - Press the LOOP button to set the loop start point, press the LOOP button again to set the loop end
point. Press a third time to cancel loop mode and resume normal playback.
16. PITCH BEND (+/- 16%) - The CD speeds up, increasing the pitch while the ( + ) button is pressed. Release the
button to return to the original BPM. The CD slows down, decreasing the pitch while the ( - ) button is pressed.
Release the button to return to the original BPM.
17. PITCH INDICATOR - This LED will be lit to indicate when PITCH mode is enabled.
18. PITCH ENABLE - Turns the PITCH SLIDER on and off. The PITCH INDICATOR above it indicates whether it is on
or off.
19. PITCH SLIDER - Use the slider to adjust the CD pitch. Slide up to decrease the pitch or down to increase the
pitch.
Controls & Functions