VocoPro CDG-1020PRO - Manual (Page 13)

13
���� ������ ����� � � � �
�����������
��������������������������� ���������������������������
01 0.0
04:21:15
ELAPSED
REMAIN
SINGLE
CONTINU
� �
� � � � � � � ��
Controls & Functions cont.
DISPLAY
1. BAR INDICATOR - The ten indicator bars provide a visual display of the approximate position of the pickup within the
current track.
2. REPEAT INDICATOR - The light flashes to indicate one track repeat, it remains lit to indicate repeat of all tracks.
3. TRACK DISPLAY - This indicates the track number of the CD or CD+G.
4. MINUTE DISPLAY - This indicates the current track or disc time in minutes.
5. SECOND DISPLAY - This indicates the current track or disc time in seconds.
6. FRAME DISPLAY - This indicates the current frame of the CD or CD+G.
7. SINGLE MODE INDICATOR - This indicates if the CD is set to play in single mode (playback stops after each track
ends).
7. CONTINUOUS PLAY INDICATOR - This indicates if the CD is set to play in continuous mode (playback continues
after each track ends).
8. ELAPSED INDICATOR - This indicates if the time is being displayed in ELAPSED MODE.
8. REMAIN INDICATOR - This indicates if the time being displayed is TRACK TIME REMAINING MODE or DISC TIME
REMAINING MODE.
9. PITCH DISPLAY - This indicates the BPM level of the pitch controlled by the PITCH SLIDER.
10. LOOP INDICATOR - This LED will be lit to indicate when LOOP mode is enabled.