Velodyne Acoustics Digital Drive Subwoofer User Manual
Page 20
Velodyne Digital Drive User’s Manual Page 15
NOTE: The subwoofer should be turned off when physically moving the unit.
NOTE: If you are constrained in room location positions, don’t worry. By following the setup steps
below, Digital Drive gives you lots of flexibility to make the most out of any room positioning.
11. Now that the room location has been chosen, turn off the subwoofer and the rest of your system
and permanently route the wiring and reconnect to your subwoofer.
12. Reactive the subwoofer and your system and ensure that the system works as before.
13. Use the MENU button to get to the EQ setup screen (after entering the 12345 code), and then
position the cursor over the NEXT field on the EQ setup screen. Press SELECT, and observe the
Sysem Settings screen, as shown on the next page: