Velodyne Acoustics Digital Drive Subwoofer - Manual (Page 25)

Velodyne Digital Drive User’s Manual Page 20
NOTE: The following steps use the parametric equalizer to achieve room equalization. If you do not
wish to use the parametric EQ feature, skip to step 23.
20. To use the parametric EQ feature, position the cursor over the EQ and press the SELECT button.
The values for that particular EQ appear on the right hand side of the screen. The following screen
is shown:
21. To manipulate a parametric EQ, you can now use the LEFT and RIGHT arrow keys to move the
frequency up and down, and the SET + and SET – keys to change the Q value. Use the UP and
DOWN arrow keys to adjust the level of the EQ as before. A selected EQ that has been moved,
with its level raised and Q adjusted is shown below: