Vivotek IP32133 - Manual (Page 37)

- 36 -
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097
Software revision upgrade
Customers can obtain the up-to-date software from Vivotek web site. An easy-to-use
Upgrade Wizard is provided to upgrade Network Camera with some clicks. This function
is open to administrators only. To upgrade the system, follow the procedures below.
1. Download the firmware file named FLASH.BIN from the appropriate product folder.
2. Run the Upgrade Wizard and proceed by the prompts. Refer to the instructions of
Upgrade Wizard for details.
3. The whole process will finish in couple minutes and automatically restart the system.
If the power fails during the writing process of Flash memory, the program in the
memory of MiniAVServer may be destroyed permanently. If MiniAVServer cannot
restart properly, ask the dealer for technical service.