Vestax CDX-16 - Manual (Page 6)

B E F O R E U S E
Using CDs.
A conventional CD consists of two (2) sides. Typically one side bears a label stating the name of the CD and artist
whilst the front side, rainbow like in its color, contains the information that makes this technology work. There are
approximately six (6) million data items stored on any one given CD front surface. Please make sure to load the
CD into the playing mechanism correctly, so that the front side (rainbow) is unable to be seen once the lid is
closed.
Unlike conventional analog turntables, CD technology uses a fine laser beam instead of a stylus to read the
contents of the disc. As a result of there being little physical contact, a CD will take infinitely longer to degrade.
Repeated use of a CD, even playing over the same track again and again will likely have very little effect on the
audible quality of the discs data.
However, the front surface of a CD is brittle and may be scratched or damaged if you are careless in its handling.
Thus, please take care to load you CDs correctly and ensure that you store them in a safe place. Furthermore,
avoid leaving CDs in direct sunlight or in close proximity to a heating device or hot object, in the rain or in water,
or on surfaces that have excessive moisture or surface dirt/grime. Also take care when cleaning any CD by using a
recommended or special purpose cleaning cloth, cleaning spray or product and always wipe in the direction
illustrated below.
F U N C T I O N S
TOP
Wipe from the inside out. Do not wipe in a circular fashion.
Never use record cleaner designed for conventional analog disks, this will degrade the CD disc surface.
Always store disc properly in the case.
Warning
Please do not inhibit access to this unit's main switch by operating it in a confined area.
Do not expose to water, moist environments or operate this device in an area likely to be effected by liquid
spillage or dripping.