Installation and operation – VIEWSONIC VS575C User Manual
Page 15
VS375C/VS575C
9
3. INSTALLATION AND OPERATION
Before installation, please read and understand the following instructions:
3.1 Unpacking and Inspection
Examine the packing carton for damage and accessory in the box. Notify the carrier
immediately if damage is observed.
* UPS *1
* User Manual *1
* Power Cord *1
* CD-ROM *1
* Communication Cable *1
* Telephone Line *1
3.2 Placement
1.
This unit is intended for indoor use only. Although your UPS is very rugged, its
internal components are not sealed from the environment.
2.
The UPS must be installed in a protected environment away from heat-emitting
appliances such as heaters or radiators. Do not install this product where excessive
moisture is present.
3.
The location should provide adequate air flow around the UPS with one inch
minimum clearance on all sides for proper ventilation.
3.3 Determining How Much Equipment You Can Connect to Your UPS
1.
Make a list of all equipment that requires protection.
2.
Each piece of equipment has voltage and current (VA) ratings printed on the back
label (see examples below). Your equipment may have a voltage rating such as 88-
264V. If you live in the United States you should use 120V in your calculations, since
the standard voltage in the United States is 120V.