VIEWSONIC VS575C User Manual
Page 17
VS375C/VS575C
11
3.5 Connecting Your Equipment to the UPS
1.
For all UPS models except the 2x0V versions: connect the power cord(s) of your
computer equipment to the output receptacle(s) of the UPS. Switch on the computer
equipment.
2.
For 2x0V versions, as shown in the illustration below: connect the input power cord
of your computer equipment to the inlet of the UPS and the wall socket. Use the
power cord supplied with the UPS to connect from the outlet of the UPS to your
equipment. Switch on the computer
3.
DO NOT PLUG LASER PRINTERS INTO THE UPS BECAUSE THEY TYPICALLY
DRAW TOO MUCH POWER
3.6 Operation and Function Test
1.
Connect the input power and turn on the UPS. The front panel Normal Mode LED will
light.
2.
The UPS may be overloaded if the UPS buzzer sounds continuously and the Battery
Fault LED flashes. Unplug the least critical devices, such as a printer, etc. If the
buzzer is still sounding, the battery or UPS may be faulty. Contact your local dealer
for assistance.