Vivitar DVR-410 User Manual
Page 22
21
Please follow the below steps:
1.
Power on your Digital Video Camera.
2.
Turn on your TV.
3.
Ensure that your TV is set to NTSC mode.
4.
Connect your Digital Video Camera to the TV with the special TV cable supplied.
5.
Connect the White cable to the Audio slot and the Yellow cable to the Video slot.
6.
The LCD screen of your Digital Video Camera will now turn off and the image will now appear on the
TV screen.
7.
To see a video being captured in real time on your TV, point the camera at the object and begin to
record as described in the Shooting Videos section above.
8.
The image being recorded appears on your TV screen (instead of the camera`s LCD)
9.
You can also use the TV screen instead of your camera screen to playback and view your videos and
photos.
Note: Ensure your Digital Video Camera has sufficient battery power before using this function.
The LCD screen of your Digital Video Camera will be turned off (blank) after you connect it to the TV.