Vivitar DVR-410 - Manual (Page 24)

23
Connect your Camera to the Computer
1. Push the built-in USB connector out to connect your camera to the USB port of your computer.
2. Turn the camera on.
3. The first time you connect the device to the computer you will have to wait a few seconds until the
computer recognizes the device.
4. As your camera is a mass storage device “MSDC” will appear on the LCD, indicating that your
camera is in Mass Storage Mode.
Get photos and videos from your camera to your computer
An SD/MMC card needs to be inserted into the camera. Do not disconnect the camera during file transfer.
Doing so will cancel the transfer of any files on their way to your computer.
1. Select the “Get Images” button from the Home window.