VIEWSONIC PJL3211 - Manual (Page 44)

39 ViewSonic PJL3211
Item Description
MY BUTTON
Ths tem s to assgn one of the followng functon to MY BUTTON
1 and 2 on the remote control (5).
Choose 1 or 2 on the MY BUTTON menu using the ◄/► button
first. Then using the ▲/▼ buttons sets one of the following functions
to the chosen button.
• COMPUTER1: Sets port to COMPUTER IN1.
• COMPUTER2: Sets port to COMPUTER IN2.
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to VIDEO.
• INFORMATION: Dsplays a dalog of INPUT INFORMATION (41).
• AUTO KEYSTONE EXECUTE:
Performs automatc keystone dstorton correcton (31).
• MY MEMORY:
Loads one of adjustment data stored (25).
If you want to keep the current adjustment, please press the ◄
button to qut. Otherwse the current adjusted condton wll be lost
by loadng a data.
• PICTURE MODE: Changes the PICTURE MODE (21).
• FILTER RESET:
Displays the filter time reset confirmation dialogue (38).
• VOLUME+: Set the volume up.
• VOLUME-: Set the volume down.
SERVICE
Selectng ths tem dsplays the SERVICE menu.
Select an item using the ▲/▼ buttons, and press the ► button or
the ENTER button to execute the tem.
FAN SPEED ó AUTO ADJUST ó GHOST ó FILTER MESSAGE ó KEY LOCK
FACTORY RESET ó I NFORMATION ó REMOTE FREQ.
FAN SPEED
Using the ▲/▼ buttons switches the rotation speed
of the coolng fans. The HIGH s the mode for use at
hghlands etc. Note that the projector s noser when
the HIGH s selected.
HIGH ó NORMAL
OPTION Menu (continued)
OPTION Menu
6GORQTCT[EQPFKVKQP

/'/14;  4GECNNUCXGFRCTCOGVGTU
 3WKV
0QUCXGFFCVC
(#052''&
*+)*
014/#.
(contnued on next page)
When the current adjustment
s not saved to memory a
dalog s dsplayed.
When no data s saved
n memory, a dalog s
dsplayed.