VIEWSONIC PJ755D - Manual (Page 21)

ViewSonic PJ755D 19
Image-II
Keystone (Keystone Correction)
Adjust image distortion caused by tilting projector. (±16 degrees)
Press OK to adjust
* Vertical keystone: Press the or to adjust image distortion ver-
tically and makes a squarer image.
* Horizontal keystone: Press the or to adjust image distortion
horizontally and makes a squarer image.
Position
Adjust the image position. Press OK to adjust
Vertical Position
* Press the
to move the image down.
* Press the to move the image up.
Horizontal Position
* Press the
to move the image left.
* Press the to move the image right.
Color Temp.
Adjust the color temperature. At higher temperature, the screen looks colder; at lower temperature, the
screen looks warmer.
Display Format
Use this function to choose your desired aspect ratio.
*
Windows: The input source will be compacted in the center with scaling.
* 4:3: The input source will be scaled to fit the projection screen.
* 16:9: The input source will be scaled to fit the width of the screen.
* Letterbox: Letterbox mode zooms a letterboxed image intended for 4:3 display to full screen
wide.
Advance
Press OK to adjust the R (Red), G (Green), or B (Blue) for brightness and contrast.
Reset
Press OK to return the display parameters on all menus to their factory default settings.
* “Position” function is
not supported under
DVI-I source.
Position
Colour temp.
Display format
Advance
Reset
Language
Image - I
Management PIP
Image - II Audio
Keystone
Press OK to adjust
Press OK to adjust
Press OK to reset
Press OK to adjust
Position
Colour temp.
Display format
Advance
Reset
Language
Image - I
Management PIP
Image - II Audio
Keystone
Press OK to adjust
Press OK to adjust
Press OK to reset
Press OK to adjust
Vertical keystone
Horizontal keystone
Vertical position
Horizontal position
Original Input The letterbox