Visioneer NETSCAN 4000 - Manual (Page 27)

20 V ISIONEER N ETSCAN 4000 U SER ’ S G UIDE
S
PECIFYING THE
S
CANNER
’
S
N
ETWORK
S
ETTINGS
1. Turn on the machine. After warming up for a few seconds, the default
working mode is displayed on the touch panel. For example, the
following is for the Copy mode.
Note:
■ If the system administrator has chosen DHCP, then the IP address of
TCP/IP, gateway, subnet mask, and DNS server will be automatically
configured.
■ When installing the scanner for the first time, it is recommended that
the Administrator retain the default system settings. The settings can
be customized at a later date once you are familiar with the operation
and functionality of the scanner.