Visioneer NETSCAN 4000 - Manual (Page 38)

S UMMARY OF THE M ENU O PTIONS
31
Copier Default : Used to specify the scanner’s default copy settings. Note when the system
auto reset time is over, or the device is turned on and off again, the copy settings will be reset to
these values.
Item Description
Basic
Image Density The image density can be adjusted within a range of 7 levels using
the control panel, or using the scanner's Web Page. Increasing the
value makes the printouts darker, decreasing the value makes the
printouts lighter.
Choices: 1, 2, 3, *4, 5, 6, 7
Copy Mode Choose the focus of your copy result. For example, if your document
contains pictures, choose Photo for clearer graphic quality. If your
document contains text only, choose Text. Speed mode is the
standard mode for all documents.
Choices: *Speed, Text, Photo
Image Edit
Erase Border Sets the width of the border you want removed from the image.
Choices:
*0 / 0.25 / 0.5 / 0.75 / 1.0 inch or *0 / 6 / 13 / 19 / 25 mm
Margin
Adjustment The “Margin Adjustment” option will move the copy image to the
right and/or to the bottom; depending on the “Right” and “Bottom”
parameters.
Choices for Right or Bottom:
*0 / 0.25 / 0.5 / 0.75 / 1.0 inch or *0 / 6 / 13 / 19 / 25 mm
Unit Choose the unit of measurement you want to use.
Choices: *inch, mm
* Factory Default
Advanced Copy
Collate Choose the order you want your copies to be placed in “*Sort” (e.g.
pages 1,2,3 / 1,2,3 / 1,2,3) or “Stack” (e.g. pages 1,1,1 / 2,2,2 /
3,3,3).