VIEWSONIC Network Media Player NMP-500 - Manual (Page 18)

ViewSonic NMP-500 14 of 38
V
IDEO
/A
UDIO
C
ONFIGURATION
This screen is used to adjust the display and audio parameters. Click Management > Video/
Audio. The screen shown below appears.
1 In the TV Mode field, click the down arrow for the pull-down menu and select one of the
options.
2 Move the Brightness slider: values range between -128 and 127
3 Move the Contrast slider: values range between 0 and 255
4 Move the Saturation slider: values range between 0 and 255
5 Move the Audio Channel Volume (left) slider: values range between 0 and 100
6 Move the Audio Channel Volume (right) slider: values range between 0 and 100
7 If any changes were made to this screen, do the following:
• To enable the changes, click Apply
• To save the changes, click the Administration menu > click Save Configuration > click Save.