VIEWSONIC Network Media Player NMP-500 - Manual (Page 27)

ViewSonic NMP-500 23 of 38
ADMINISTRATION
A
DVANCED
V
IDEO
C
ONFIGURATION
To adjust the size and location of the video on the screen, click Administration > Advanced
video. The screen shown below appears.
1 In the X of destination window, type the center point of the screen on the X axis.
2 In the Y of destination window, type the center point of the screen on the Y axis.
3 In the Width of destination window, type the width of the destination window.
4 In the Height of destination window, type the height of the destination window.
5 If any changes were made to this screen, do the following:
• To enable the changes, click Apply
• To save the changes, click the Administration menu > click Save Configuration > click
Save.