Operating instructions, Making calls, Answering calls – VTech Telephone User Manual
Page 8: Disconnecting
8
Making Calls
•
Pick up the Handset and press PHONE.
•
When you hear a dial tone, dial the number.
•
The IN USE LED will illuminate while the Handset is on a call. If you make a mistake
when dialing, press OFF to hang up, then press PHONE to get the dial tone again.
•
You must always press PHONE before you can dial a call on the Handset.
Answering Calls
•
When an incoming call is ringing, the IN USE LED on the Base and Handset will
flash.
•
To answer a call when the Handset is in the Base, just pick up the Handset.
— OR —
•
To answer a call when the Handset is away from the Base, press any key on
the Handset (except OFF). This is very useful in a dark environment; you do not
have to fumble around looking for the PHONE key to answer the call.
Disconnecting
•
To end a call, press OFF on the Handset.
— OR —
•
Place the Handset back in the Base.
Operating Instructions