VTech LS6325-2 - Manual


Quick start guide
LS6375-3 (LS6325-2 and IS6100)
Introduction
This quick start guide provides you with the basic installation
and use instructions. A limited set of features are described in
abbreviated form.
Please refer to the user’s manual for complete installation and
operation instructions.
Telephone base and handset charger installation
Install the telephone base and handset charger as shown below.
Use only the power adapters and batteries supplied with
this product.
Handset battery installation and charging
Install the handset battery as shown below. Once you have
installed the handset battery, you may be able to make and
receive short calls. For best performance, charge the handset
battery continuously for at least 6 hours.
CHarge light
remains on
when charging.
 Plug the battery connector
securely into the socket,
matching the color-coded
label.
2 Place the battery with the
wires inside the battery
compartment.
3 Slide the battery
compartment towards the
center of the handset until it
clicks into place.
4 Charge the handset in the
telephone base.
Telephone base
Telephone
wall jack
Handset charger
Electrical outlet not
controlled by a wall switch
If you have DSL
high speed
Internet service,
a DSL filter (not
included) is
required.
Telephone
line cord
Telephone base
power adapter Handset
charger
adapter