VTech LS6325-2 - Manual (Page 4)

4
Telephone settings
Default settings are indicated by an asterisk(*).
Screen display Function Options
LCD language Set the screen display
language.
english*
Français
español
Clr voicemail Turn off the voicemail
indicators.
Turn off indicator?
Key tone Set whether the handset
beeps whenever a key is
pressed.
On*
Off
Set date/time Set the date and time for
the telephone system.
--:-- --/--
Home area code Set the home area code
so that the call log stores
only seven digits for local
telephone numbers.
_ _ _
Dial mode Set the handset to be tone
dial or pulse dial.
Tone*
Pulse
Using the menu
To enter the handset menu:
Press MeNU/
SeLeCT
when the handset is
not in use.
Press
/
VOL
or
VOL
/
CID
until the
> symbol displays next to the desired
feature menu.
Press
MeNU
/SeLeCT to enter that menu.
To return to the previous menu, press OFF/CLear.
To return to idle mode, press and hold OFF/CLear.
.
2.
3.
•
•
Make a call
Press /
FLaSH
or on the handset and
then dial the telephone number. Press
on the headset to join the call and hang
up the handset at any time.
-Or-
Predial by first dialing the telephone number and then press
/
FLaSH
or on the handset. Press on the headset to join
the call and hang up the handset at any time.
answer a call
Press on the headset, or /
FLaSH
, or any of the dialing
keys on the handset.
end a call
Press on the headset or place the headset in its charger.
Press OFF/
CLear
on the handset or place the handset in the
telephone base or its charger.
redial
Each system handset stores the 20 most
recently dialed numbers. When there are
already 20 entries, the oldest entry is deleted
to make room for the new entry.
To review and dial a number from the redial list:
Press reDIaL/
PaUSe
when the handset is not in use.
Press /
VOL
,
VOL
/
CID
or reDIaL/
PaUSe
repeatedly until the
desired entry displays.
Press /
FLaSH
or to dial.
To delete a redial entry:
When the desired redial entry displays, press
MUTe
/reMOVe.
•
•
•
•
.
2.
3.
Telephone operation
The > symbol
indicates the
feature to select.
>Ringers
Settings