VIEWSONIC V 37 - Manual (Page 12)

9LHZ6RQLF 3RFNHW 3& 9 
IMPORTANT:
• Before installation, make sure you have Microsoft Outlook installed
on your PC. If you do not have Outlook, you can install Outlook 2000
from the provided ViewSonic Pocket PC V37 Companion CD.
• Do not connect your V37 to your PC before ActiveSync is installed.
 Turn on your PC.
 Insert the Microsoft ActiveSync Utility CD into the CD-ROM drive of your PC.
The ActiveSync installation screen should open immediately. If this does not
happen, double-click Setup.exe and go to Step 3.
 Click the arrow on the first screen to enter the main screen. Click Start
Here, then click Install ActiveSync 3.5. Click Install to start the
installation.
 When prompted, connect your V37 to your PC using the USB cradle as
follows:
(1) Place the V37 in the USB cradle.
(2) Connect the AC adapter to the power connector on the USB plug.
(3) Connect the USB cable to your PC. The Found New Hardware Wizard
will appear.
 Follow the on-screen instructions to to complete the USB driver installation.
The V37 will automatically connect to your PC.
 Follow the on-screen instructions to synchronize the V37 with your PC.
After your first synchronization, the data you have stored on your PC, such as
Calendar, Contacts, and Tasks, is copied to your V37. You’re now ready to take
it along with you when you go.
For more information on ActiveSync, see Chapter 4.