Vizualogic A1000 - Manual (Page 4)

4 17
1. IR Sensor – Allows the remote to
navigate the OSD (On Screen
Display) on this unit and to control
other functions and accessories.
2. Infrared Transmitters – Used to
transmit audio to the wireless head-
phone.
3. POWER LED
4. POWER – Soft-power on/off.
5. SOURCE – Selects the AV source
from driver’s headrest/passenger
headrest/auxillary input
6. MENU – Enters and navigates the
OSD menus (Main Menu and
Hidden Menu).
7. UP – Increases the selected value
or navigates upwards through the
options.
8. DOWN – Decreases the selected
value or navigates downwards
through the options.
1
2
3
4
5
6
7
8
Specifications
Display Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .LCD
Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.0˝ (Diagonal)
Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1440(w) x 234(h)
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .400 nit max
Video Display System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NTSC/PAL
Horizontal View Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+/- 60°
Vertical View Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+60° / -30°
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-10-70° C
Expected Backlight Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10,000 hours
Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 to 16V DC
Monitor Control Buttons Troubleshooting
No Picture
(1) Verify that the correct video input mode is used on the monitor.
(2) Verify that the video cables are securely connected.
No Sound
(1) Verify that the correct audio input mode is used on the monitor.
(2) Verify that the audio cables are securely connected.
IR Sensor Inoperative
(1) Verify that the batteries in the remote are installed correctly and in good
condition.
(2) Verify that the remote sensor eye is not obstructed.