Vizualogic A1000 - Manual (Page 6)

6 15
Remote Control Operations
NOTE: The remote control will control all Monitor and integrated DVD functions.
The remote is not a fully universal remote control and is only guaranteed to
work with Vizualogic products.
MONITOR FUNCTIONS
1. MONITOR POWER – Press this button to
turn the monitor ON. The current video
source will be displayed on screen, and
within a few seconds the picture will
appear. Press the button again to turn
the monitor OFF.
2. SOURCE SELECT – All video sources
connected to the AV inputs can be viewed
on the monitor by pressing this button.
Each time the button is pressed, the AV
source will change in the following
sequence: AV1; AV2; AV3.
3. DOWN – Shifts left or down OSD menu.
Decreases the value of TINT, COLOR,
BRIGHTNESS, or CONTRAST bar.
4. UP – Shifts right or up OSD menu.
Increases the value of TINT, COLOR,
BRIGHTNESS, or CONTRAST bar.
5. ZOOM – Selects the screen-mode among
wide/normal/zoom.
6. PICTURE SELECT – Press this button to change the value of TINT,
COLOR, BRIGHTNESS, or CONTRAST.
7. FM ON/OFF – Press this button to turn on the Frequency Modulator. Press
this button again to turn off the Frequency Modulator.
8. FREQUENCY SELECT – Press this button to select the desired Frequency
Modulator channel.
1
2
3
7
5
6
4
8
Optional Accessories
To increase the enjoyment and utility of your Vizualogic System, several
accessories are available from your local authorized distributor/retailer:
WIRELESS STEREO HEADPHONES
• 2-channel
• IR headphones
(90-3018)