Verbatim External Hard Drive NAS - Manual (Page 35)

35
Error Notifi cation
The NAS drive features a range of features to monitor product status and
to report errors. To enable and setup these features, select the screen at
Control Panel / System / Error Notifi cation. These settings are grouped into
four sections, as described below. After completing this form, press Save to
save your changes.
Monitoring Services
Here you may select which of the following four functions you would like to
monitor:
Disk Usage
•
Windows File Sharing Server
•
FTP Server •
DHCP Server •
Check Interval
Enter how frequently you would like functions to be checked.
E-mail Notifi cation
NAS drive has the capability to send you an e-mail message containing
status information for the functions being monitored. To enable this feature,
check the box marked “Enable” and fi ll in the form provided with the IP
address of the mail server that will process your automatic e-mail notices.
Also fi ll in up to fi ve (5) destination mail addresses for these e-mail notices.
Pop-Up Notifi cation
In addition to e-mail notifi cation, the product has the capability to use the
Messenger service to display a pop-up message on your computer screen.
To enable this feature, check the box marked “Enable” and fi ll in the form
provided with the hostnames of up to fi ve (5) computers that will receive
these pop-up notices. This feature requires that your computer’s Messenger
service is enabled and running, and that your network administrator has not
blocked the service.
Network Service
The Network Service group of settings provides control over the built-in