Using 3gpp-compatible mobile devices – Vivotek PZ7132 User Manual

Page 16

Advertising
background image

VIVOTEK

16 - User's Manual

Using 3GPP-compatible Mobile Devices

To view the streaming media through 3GPP-compatible mobile devices, make sure the Network

Camera can be accessed over the Internet� For more information on how to set up the Network

Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 8�

To utilize this feature, please check the following settings on your Network Camera:

1� Because most players on 3GPP mobile phones do not support RTSP authentication, make

sure the authentication mode of RTSP streaming is set to disable�

For more information, please refer to RTSP Streaming on page 42�

2� As the the bandwidth on 3G networks is limited, larger video sizes are not available� Please

set the video and audio streaming parameters as listed below�

For more information, please refer to Audio and video on page 52�

Video Mode

MPEG-4

Frame size

176 x 144

Maximum frame rate

5 fps

Intra frame period

1S

Video quality (Constant bit rate)

40kbps

Audio type (GSM-AMR)

12.2kbps

3� As most ISPs and players only allow RTSP streaming through port number 554, please set

the RTSP port to 554� For more information, please refer to RTSP Streaming on page 42�

4� Launch the players on 3GPP-compatible mobile devices (ex� Real Player)�

5� Type the following URL commands in the player�

The address format is rtsp://<public ip address of your camera>:<rtsp port>/<RTSP streaming

access name for stream1 or stream2>.

For example:

rtsp://192.168.5.151:554/live.sdp

Advertising