ViewEra V220 User Manual
Page 10
3.2 OSD menu
a. OSD menu with VGA connection
b. OSD menu with DVI connection
1. Auto Adjustment: Adjust geometry of the picture automatically. (for VGA mode only)
2. Brightness: Adjust the brightness level of the picture.
3. Contrast: Adjust the difference in luminance between light and dark areas of the picture.
4. H. Position: Adjust the horizontal position of the picture.
5. V. Position: Adjust the vertical position of the picture.
6. Clock: Adjust the frequency of the signal.
7. Phase: Adjust the phase of the signal.
8. Signal Source: Change the signal mode between VGA and DVI on OSD.
9. Color: Adjust the color temperature of the picture.
9300K - Select the color temperature of 9300K.
7800K - Select the color temperature of 7800K.
6500K - Select the color temperature of 6500K.
User mode: Adjust R. G. B. gain levels.
W-B: Auto color balance.
10. Volume: Adjust the speaker volume.
11. Sharpness: Adjust the picture to be in focus.
12. OSD Position/ Transparency: Adjust the OSD display position and transparency.
13. Recall: Reset the factory default settings.
14. Language: Set the language of the OSD windows.
15. Exit: Close the OSD menu.
16. Resolution in use
17. Horizontal frequency in use
18. Vertical frequency in use
19. OSD Timer: Set the OSD menu display time. (It appears when
“
Signal Source
”
is selected.)
8