Troubleshooting – VocoPro PKJ-9090PRO User Manual

Page 23

Advertising
background image

Troubleshooting

No sound coming from

selected music source

No video output from

display devices

Video cancel/partner

features are not working

properly

Talk over feature lowers

microphone volume with

music volume

Crossfader isn’t fading

between channels

No channels or volume

being cued to head phones

No audio being routed

through insert channels

No echo applied to audio

High-pitched squealing

occurs when using the

microphone

Source toggle switch is set

incorrectly

Gain or master levels are

turned down

External device(s) are either

not connected or not working

properly

Player source is not properly

connected to the KJ-7800

Video in, or the KJ-7800 out to

the display monitor

Video cable(s) are not properly

connected

Disc medium is not formatted

for video

Disc is not multiplexed

Microphone being used is not

plugged into Mic channel 1

Active source(s) are not

assigned to the crossfader

Cue buttons for channel(s) are

not selected

Cue level is turned down too

low

Cue/Master button is set to

“Master” preventing selectable

channel cueing

Cable(s) connected are not

designed for “Insert” use

Echo master level control is

turned down

Echo On/Off button is set to off

Channel specific echo level

control is turned down

Microphone is pointed to, or to

close to speakers

Treble level(s) are too high on

microphone channel(s)

Change source toggle to the

correct setting

Raise gain and master levels

to an appropriate level

Check external device(s)

connections and viability

Check all video connections in

from the player and to the

video monitor out from the

KJ-7800.

Reconnect cables firmly to

correct video jacks

Play a video formatted disc i.e.

CD+G, VCD, LD or DVD

Insert a multiplexed disc

Connect microphone to Mic

channel 1

Assign active sources to the

crossfader

Press Cue button on

channel(s) you want cued

Turn up cue volume level

Press Cue/Master button in for

“Cue” setting

Replace cables with proper

Insert cables

Turn echo master level control

up

Set echo On/Off button to On

Turn channel specific echo

level control up

Move microphone away from

speakers

Turn down treble level(s) on

microphone channel(s)

22

Problems

Possible Cause(s)

Solution(s)

Advertising