Delta control panel software – M-AUDIO Delta RBUS User Manual

Page 19

Advertising
background image

sent out the Delta R-BUS. This also enables you to use the Delta R-BUS
with the sound applets included with Windows. To set this up, go to
Control Panel | Multimedia. In the Audio Properties page, set the
Playback and Recording devices to the Delta R-BUS input and output
devices of your choice. The most practical choice may be the SP/ANA
output, using the Delta R-BUS’s analog outs to monitor the system
sounds.

Delta Control Panel Software

ON THE PC:

Once the Delta R-BUS is properly installed, an "M Audio

Delta H/W" icon will be displayed in your Windows Control Panel. By
double-clicking on that icon, you will launch the Delta Control Panel
software. You may also launch the Delta Control Panel software from the
desktop if you have previously created a shortcut there (see "Verifying
Delta Control Panel Software Installation" section for instructions on how
to do this). Once the Delta Control Panel software has been opened, you
will see the main panel and its several tabs. To display a desired page,
click on its tab. Below are functional descriptions of each page.

ON THE MAC:

The Delta Control Panel must be placed on the hard

drive by dragging the application from the Drivers disk. Once this is
done, an alias may be created by highlighting the Delta Control Panel on
the hard drive and pressing the Apple key+M. Then, this alias may be
dragged to the desktop. Double clicking either will launch the control
panel. Once the Delta Control Panel software has been opened, you will
see the main panel and its several tabs. To display a desired page, click on
its tab. Below are functional descriptions of each page. Though most of
the descriptions are Windows based, the functions are identical unless
otherwise indicated. Within each section you will find the necessary
name changes for using the Delta Control Panel “ON THE MAC.”

NOTE: When using a music software program that is ASIO
capable, launch the Delta Control Panel software from within
that program. There will be a button in the ASIO or Audio
setup page that will allow you to do so. Some of the control
panel functions will be controlled from within that program,
so it is desirable to launch the music program first, and then
the Delta Control Panel from the the program’s “launch” or
“control panel” button. Without the music program open
however, it is okay to open the Delta panelfrom your desktop
or other location.

19

Advertising